plastic cup machine making for sale in India plastic novelty cup production line beer cup injection molding price
.FOUR SHORT STROKE MOLD BREAK CYLINDERS
For accurate mold height control with closed loop position feedback, ensures the mold is clamped with parallel movement.
HIGHLY RIGID INJECTION UNIT GUIDANCE
with independent movement of the screw drive support.
.The Hydraulic Units
High efficiency, Energy-saving and high precise proportional pressure and flow variable displacement pump system make the out of the hydraulic system matching the required powe
for entire machine operation without loss of high pressure throttle and overflow energy. As comparedwith constant displacement pump, it saves power by 30%~60%. A motor with same power may be fitted with an oil pump of bigger displacement and thus accelerates the speed of machine.Besides, the low oil temperature will prolong the service life of sealing elements.
Buffer device is used in every mold opening and clamping oil way to ensure steady mold opening and clamping operation without any impact.Besides, differential mold clamping operation is fitted to ensure high production efficiency.
Servo Machines Features
1. High energy savings
Under normal operating conditions, compared with conventional
hydraulic injection molding machines, energy savings of 20-80%
can be achieved.
2. Molding stability
Compared with conventional injection molding machines repeatability is greatly improved due to servo motor closed-loop control.
3. Quick response
Featuring a dynamic servo motor with a response time of only 0.05sec
4. Quiet operation
The machine runs at much lower noise levels, particularly in low speed applications.
15.The servo system only delivers hydraulic oil as it is needed for the various functions. This prevents unnecessary generation of heat and substantially reduces oil cooling requirements.
Servo energy-saving system
Using the servo motor oil esectriciyt composite sturcture, high response, low noile and excellent
electricity -saving performance.
| SPECIFICATION |
HJF-240 |
| |
A |
B |
C |
| Screw Diameter |
Mm |
50 |
55 |
60 |
| Screw L/D Ration |
L/D |
22.2 |
20 |
18.2 |
| Shot Size(Theoretical) |
cm3 |
508 |
593 |
706 |
| Injection Weight(PS) |
g |
462 |
534 |
642 |
| Injection Rate |
g/s |
148 |
179 |
202 |
| Injection Pressure |
MPa |
180 |
160.8 |
128 |
| Screw Speed |
rpm |
0~180 |
| Clamp tonnage |
KN |
2400 |
| Opening stroke |
Mm |
490 |
| Space Between Tie Bars |
mm |
530*510 |
| Max.Mold Height |
mm |
530 |
| Min.Mold Height |
mm |
200 |
| Ejector Stroke |
mm |
165 |
| Ejector Tonnage |
KN |
70 |
| Max.Pump Pressure |
MPa |
16 |
| Pump Motor Power |
KW |
18.5 |
| Heater power |
KW |
11.65 |
| Machine Dimension(L*W*H) |
M |
5.4*1.5*2 |
| Machine weight |
T |
7 |
| Oil Tank Capacity |
L |
340 |
Product Tags:
|
|
Horizontal Plastic Mould Injection Machine / Plastic Mold Making Machine For Electric Parts Images
|
